Call Us: (855) 360-5460

AnsCare Disposable Procedural Mask ASTM Level 1 – Black (Case/400)

AnsCare Black 3 Ply ASTM 1 Mask

$92.89

Product Overview

When it comes to face masks, medical professionals need a solid safeguard throughout all areas of their field. Whether you’re an orthopedic surgeon or on the front-lines of the ER, our domestically made surgical face masks keep you and your patients protected from hazardous airborne particles.

Wholesale Pricing? Call 855-360-5460 for special pricing

Description

Black 3-ply procedural masks with comfort ear loops. Meets or exceeds ASTM Level 1 requirements.

AnsCare Level 1 procedural masks are manufactured by ANS-PAK in the USA under exacting quality control standards. The mask construction features custom-designed elastic ear loops to provide all-day comfort and prevent ear fatigue, and a flexible coated metal nose bridge which can be adjusted to provide a close, gap-free fit. The 3-ply material provides protection which exceeds ASTM Level 1 (F2100-19) requirements.

Key Features
  • MADE IN THE USA
  • 100% post consumer packaging
  • Extra-comfort ear loops
  • 3-ply pleated construction
  • Adjustable nosepiece
  • Meets or exceeds ASTM Level 1 requirements for PFD, BFE, Breathability and Flammability
  • Latex-free
  • Single use
  • Non-sterile
Mask Construction
  • Outer layer: 25 GSM hydrophobic non-woven PP spunbond
  • Middle layer: 27 GSM BRE >95% non-woven PP meltblown
  • Inner layer: 25 GSM soft absorbent non-woven PP spunbond

400 to a case: 40 packs of 10 masks (Black)

PLEASE NOTE: Information above in this section might be an overall summary about the product line and not in regards to the specific product. If you have any questions, Please E-mail or Call  1-855-360-5460.

Additional information

Weight .5 lbs
Dimensions 9 × 5 × 5 in

Documentation

Certifications and Registrations
  • BFE (Bacterial Filtration Efficiency): ≥ 95%.  Test performed to determine the filtration efficiency of test articles by comparing the bacterial control counts upstream of the test article to the bacterial counts downstream.
  • PFE (Particle Filtration Efficiency):  ≥ 95%.  Test performed to evaluate the non-viable particle filtration efficiency (PFE) of the test article.
  • Differential Pressure (Breathability): < 5.0 mmH2O/cm2.  The Delta P test is performed to determine the breathability of test articles by measuring the differential air pressure on either side of the test article using a manometer, at a constant flow rate.
  • Flammability: Burn time ≥ 3.5 seconds. Test performed to evaluate the flammability of plain surface clothing textiles by measuring the ease of ignition and the speed of flame spread.
  • Synthetic Blood Penetration Resistance: Passed 80 mmHg requirements. Test performed to evaluate surgical facemasks and other types of protective clothing materials designed to protect against fluid penetration.

Related products

AnsCare Disposable Procedural Mask ASTM Level 1 – Black (Case/400)

AnsCare Black 3 Ply ASTM 1 Mask

$92.89

Product Overview

When it comes to face masks, medical professionals need a solid safeguard throughout all areas of their field. Whether you’re an orthopedic surgeon or on the front-lines of the ER, our domestically made surgical face masks keep you and your patients protected from hazardous airborne particles.

Wholesale Pricing? Call 855-360-5460 for special pricing

Description

Black 3-ply procedural masks with comfort ear loops. Meets or exceeds ASTM Level 1 requirements.

AnsCare Level 1 procedural masks are manufactured by ANS-PAK in the USA under exacting quality control standards. The mask construction features custom-designed elastic ear loops to provide all-day comfort and prevent ear fatigue, and a flexible coated metal nose bridge which can be adjusted to provide a close, gap-free fit. The 3-ply material provides protection which exceeds ASTM Level 1 (F2100-19) requirements.

Key Features
  • MADE IN THE USA
  • 100% post consumer packaging
  • Extra-comfort ear loops
  • 3-ply pleated construction
  • Adjustable nosepiece
  • Meets or exceeds ASTM Level 1 requirements for PFD, BFE, Breathability and Flammability
  • Latex-free
  • Single use
  • Non-sterile
Mask Construction
  • Outer layer: 25 GSM hydrophobic non-woven PP spunbond
  • Middle layer: 27 GSM BRE >95% non-woven PP meltblown
  • Inner layer: 25 GSM soft absorbent non-woven PP spunbond

400 to a case: 40 packs of 10 masks (Black)

PLEASE NOTE: Information above in this section might be an overall summary about the product line and not in regards to the specific product. If you have any questions, Please E-mail or Call  1-855-360-5460.

Additional information

Weight .5 lbs
Dimensions 9 × 5 × 5 in

Documentation

Certifications and Registrations
  • BFE (Bacterial Filtration Efficiency): ≥ 95%.  Test performed to determine the filtration efficiency of test articles by comparing the bacterial control counts upstream of the test article to the bacterial counts downstream.
  • PFE (Particle Filtration Efficiency):  ≥ 95%.  Test performed to evaluate the non-viable particle filtration efficiency (PFE) of the test article.
  • Differential Pressure (Breathability): < 5.0 mmH2O/cm2.  The Delta P test is performed to determine the breathability of test articles by measuring the differential air pressure on either side of the test article using a manometer, at a constant flow rate.
  • Flammability: Burn time ≥ 3.5 seconds. Test performed to evaluate the flammability of plain surface clothing textiles by measuring the ease of ignition and the speed of flame spread.
  • Synthetic Blood Penetration Resistance: Passed 80 mmHg requirements. Test performed to evaluate surgical facemasks and other types of protective clothing materials designed to protect against fluid penetration.

Related products

©2023 360 HEALTH SERVICES |  All Rights Reserved.